Hiram in the Bible
Meaning: exaltation of life; a destroyer
Exact Match
Search Results by Versions
All Versions
Search Results by Book
Old Testament (38)
- Genesis (1)
- 2 Samuel (1)
- 1 Kings (25)
- 1 Chronicles (1)
- 2 Chronicles (10)
Thematic Bible
Art » Artisans, skillful » Hiram
King Solomon sent for Hiram of Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned. He fashioned two bronze pillars; each pillar was 27 feet high and 18 feet in circumference. read more.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple. When King Solomon finished constructing the Lord's temple, he put the holy items that belonged to his father David (the silver, gold, and other articles) in the treasuries of the Lord's temple.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple. When King Solomon finished constructing the Lord's temple, he put the holy items that belonged to his father David (the silver, gold, and other articles) in the treasuries of the Lord's temple.
Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father.
Brass » Hiram
He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned.
Carving » Hiram
King Solomon sent for Hiram of Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned. He fashioned two bronze pillars; each pillar was 27 feet high and 18 feet in circumference. read more.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple. When King Solomon finished constructing the Lord's temple, he put the holy items that belonged to his father David (the silver, gold, and other articles) in the treasuries of the Lord's temple.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple. When King Solomon finished constructing the Lord's temple, he put the holy items that belonged to his father David (the silver, gold, and other articles) in the treasuries of the Lord's temple.
Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father.
Hiram » Or huram, king of tyre
King Hiram of Tyre sent messengers to David, along with cedar logs, carpenters, and stonemasons. They built a palace for David.
King Hiram of Tyre sent messengers to Solomon when he heard that he had been anointed king in his father's place. (Hiram had always been an ally of David.)
Along with Hiram's fleet, the king had a fleet of large merchant ships that sailed the sea. Once every three years the fleet came into port with cargoes of gold, silver, ivory, apes, and peacocks.
King Solomon gave King Hiram of Tyre twenty cities in the region of Galilee, because Hiram had supplied Solomon with cedars, evergreens, and all the gold he wanted.
(Hiram's fleet, which carried gold from Ophir, also brought from Ophir a very large quantity of fine timber and precious gems.
Hiram sent his fleet and some of his sailors, who were well acquainted with the sea, to serve with Solomon's men.
(Huram's servants, aided by Solomon's servants, brought gold from Ophir, as well as fine timber and precious gems.
Hiram » The artificer
King Solomon sent for Hiram of Tyre.
Now I am sending you Huram Abi, a skilled and capable man,
Hiram » Also called huram » An artificer sent by king hiram to execute the artistic work of the interior of the temple
Now I am sending you Huram Abi, a skilled and capable man,
King Solomon sent for Hiram of Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned. He fashioned two bronze pillars; each pillar was 27 feet high and 18 feet in circumference. read more.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze.
Huram Abi made the pots, shovels, and bowls. He finished all the work on God's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), read more.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze.
Hiram » Called huram, king of tyre » Builds a house for david
King Hiram of Tyre sent messengers to David, along with cedar logs, carpenters, and stonemasons. They built a palace for David.
King Hiram of Tyre sent messengers to David, along with cedar logs, stonemasons, and carpenters to build a palace for him.
Solomon sent a message to King Huram of Tyre: "Help me as you did my father David, when you sent him cedar logs for the construction of his palace.
Hiram » Called huram, king of tyre » Makes presents of gold and sailors to solomon
(Hiram's fleet, which carried gold from Ophir, also brought from Ophir a very large quantity of fine timber and precious gems.
King Solomon also built ships in Ezion Geber, which is located near Elat in the land of Edom, on the shore of the Red Sea. Hiram sent his fleet and some of his sailors, who were well acquainted with the sea, to serve with Solomon's men. They sailed to Ophir, took from there four hundred twenty talents of gold, and then brought them to King Solomon.
Hiram had sent to the king one hundred twenty talents of gold.
Hiram » Called huram, king of tyre » Helps solomon in building the temple
Solomon sent a message to King Huram of Tyre: "Help me as you did my father David, when you sent him cedar logs for the construction of his palace. Look, I am ready to build a temple to honor the Lord my God and to dedicate it to him in order to burn fragrant incense before him, to set out the bread that is regularly displayed, and to offer burnt sacrifices each morning and evening, and on Sabbaths, new moon festivals, and at other times appointed by the Lord our God. This is something Israel must do on a permanent basis. I will build a great temple, for our God is greater than all gods. read more.
Of course, who can really build a temple for him, since the sky and the highest heavens cannot contain him? Who am I that I should build him a temple! It will really be only a place to offer sacrifices before him. "Now send me a man who is skilled in working with gold, silver, bronze, and iron, as well as purple, crimson, and violet colored fabrics, and who knows how to engrave. He will work with my skilled craftsmen here in Jerusalem and Judah, whom my father David provided. Send me cedars, evergreens, and algum trees from Lebanon, for I know your servants are adept at cutting down trees in Lebanon. My servants will work with your servants to supply me with large quantities of timber, for I am building a great, magnificent temple. Look, I will pay your servants who cut the timber 20,000 kors of ground wheat, 20,000 kors of barley, 120,000 gallons of wine, and 120,000 gallons of olive oil." King Huram of Tyre sent this letter to Solomon: "Because the Lord loves his people, he has made you their king." Huram also said, "Worthy of praise is the Lord God of Israel, who made the sky and the earth! He has given David a wise son who has discernment and insight and will build a temple for the Lord, as well as a royal palace for himself. Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father. Now let my lord send to his servants the wheat, barley, olive oil, and wine he has promised; we will get all the timber you need from Lebanon and bring it in raft-like bundles by sea to Joppa. You can then haul it on up to Jerusalem."
Of course, who can really build a temple for him, since the sky and the highest heavens cannot contain him? Who am I that I should build him a temple! It will really be only a place to offer sacrifices before him. "Now send me a man who is skilled in working with gold, silver, bronze, and iron, as well as purple, crimson, and violet colored fabrics, and who knows how to engrave. He will work with my skilled craftsmen here in Jerusalem and Judah, whom my father David provided. Send me cedars, evergreens, and algum trees from Lebanon, for I know your servants are adept at cutting down trees in Lebanon. My servants will work with your servants to supply me with large quantities of timber, for I am building a great, magnificent temple. Look, I will pay your servants who cut the timber 20,000 kors of ground wheat, 20,000 kors of barley, 120,000 gallons of wine, and 120,000 gallons of olive oil." King Huram of Tyre sent this letter to Solomon: "Because the Lord loves his people, he has made you their king." Huram also said, "Worthy of praise is the Lord God of Israel, who made the sky and the earth! He has given David a wise son who has discernment and insight and will build a temple for the Lord, as well as a royal palace for himself. Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father. Now let my lord send to his servants the wheat, barley, olive oil, and wine he has promised; we will get all the timber you need from Lebanon and bring it in raft-like bundles by sea to Joppa. You can then haul it on up to Jerusalem."
Hiram » Called huram, king of tyre » Dissatisfied with the cities given to him by solomon
King Solomon gave King Hiram of Tyre twenty cities in the region of Galilee, because Hiram had supplied Solomon with cedars, evergreens, and all the gold he wanted. When Hiram went out from Tyre to inspect the cities Solomon had given him, he was not pleased with them. Hiram asked, "Why did you give me these cities, my friend?" He called that area the region of Cabul, a name which it has retained to this day.
Master workman » Instances of » Hiram
Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father.
King Solomon sent for Hiram of Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned. He fashioned two bronze pillars; each pillar was 27 feet high and 18 feet in circumference. read more.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple.
Huram Abi made the pots, shovels, and bowls. He finished all the work on God's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), read more.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze. The king had them cast in earthen foundries in the region of the Jordan between Succoth and Zarethan. Solomon made so many of these items they did not weigh the bronze.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze. The king had them cast in earthen foundries in the region of the Jordan between Succoth and Zarethan. Solomon made so many of these items they did not weigh the bronze.
Mechanic » Instances of » Hiram
Now I am sending you Huram Abi, a skilled and capable man, whose mother is a Danite and whose father is a Tyrian. He knows how to work with gold, silver, bronze, iron, stones, and wood, as well as purple, violet, white, and crimson fabrics. He knows how to do all kinds of engraving and understands any design given to him. He will work with your skilled craftsmen and the skilled craftsmen of my lord David your father.
King Solomon sent for Hiram of Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned. He fashioned two bronze pillars; each pillar was 27 feet high and 18 feet in circumference. read more.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple.
He made two bronze tops for the pillars; each was seven-and-a-half feet high. The latticework on the tops of the pillars was adorned with ornamental wreaths and chains; the top of each pillar had seven groupings of ornaments. When he made the pillars, there were two rows of pomegranate-shaped ornaments around the latticework covering the top of each pillar. The tops of the two pillars in the porch were shaped like lilies and were six feet high. On the top of each pillar, right above the bulge beside the latticework, there were two hundred pomegranate-shaped ornaments arranged in rows all the way around. He set up the pillars on the porch in front of the main hall. He erected one pillar on the right side and called it Jakin; he erected the other pillar on the left side and called it Boaz. The tops of the pillars were shaped like lilies. So the construction of the pillars was completed. He also made the large bronze basin called "The Sea." It measured 15 feet from rim to rim, was circular in shape, and stood seven-and-a-half feet high. Its circumference was 45 feet. Under the rim all the way around it were round ornaments arranged in settings 15 feet long. The ornaments were in two rows and had been cast with "The Sea." "The Sea" stood on top of twelve bulls. Three faced northward, three westward, three southward, and three eastward. "The Sea" was placed on top of them, and they all faced outward. It was four fingers thick and its rim was like that of a cup shaped like a lily blossom. It could hold about 12,000 gallons. He also made ten bronze movable stands. Each stand was six feet long, six feet wide, and four-and-a-half feet high. The stands were constructed with frames between the joints. On these frames and joints were ornamental lions, bulls, and cherubs. Under the lions and bulls were decorative wreaths. Each stand had four bronze wheels with bronze axles and four supports. Under the basin the supports were fashioned on each side with wreaths. Inside the stand was a round opening that was a foot-and-a-half deep; it had a support that was two and one-quarter feet long. On the edge of the opening were carvings in square frames. The four wheels were under the frames and the crossbars of the axles were connected to the stand. Each wheel was two and one-quarter feet high. The wheels were constructed like chariot wheels; their crossbars, rims, spokes, and hubs were made of cast metal. Each stand had four supports, one per side projecting out from the stand. On top of each stand was a round opening three-quarters of a foot deep; there were also supports and frames on top of the stands. He engraved ornamental cherubs, lions, and palm trees on the plates of the supports and frames wherever there was room, with wreaths all around. He made the ten stands in this way. All of them were cast in one mold and were identical in measurements and shape. He also made ten bronze basins, each of which could hold about 240 gallons. Each basin was six feet in diameter; there was one basin for each stand. He put five basins on the south side of the temple and five on the north side. He put "The Sea" on the south side, in the southeast corner. Hiram also made basins, shovels, and bowls. He finished all the work on the Lord's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and bowls. All these items King Solomon assigned Hiram to make for the Lord's temple were made from polished bronze. The king had them cast in earth foundries in the region of the Jordan between Succoth and Zarethan. Solomon left all these items unweighed; there were so many of them they did not weigh the bronze. Solomon also made all these items for the Lord's temple: the gold altar, the gold table on which was kept the Bread of the Presence, the pure gold lampstands at the entrance to the inner sanctuary (five on the right and five on the left), the gold flower-shaped ornaments, lamps, and tongs, the pure gold bowls, trimming shears, basins, pans, and censers, and the gold door sockets for the inner sanctuary (the most holy place) and for the doors of the main hall of the temple.
Huram Abi made the pots, shovels, and bowls. He finished all the work on God's temple he had been assigned by King Solomon. He made the two pillars, the two bowl-shaped tops of the pillars, the latticework for the bowl-shaped tops of the two pillars, the four hundred pomegranate-shaped ornaments for the latticework of the two pillars (each latticework had two rows of these ornaments at the bowl-shaped top of the pillar), read more.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze. The king had them cast in earthen foundries in the region of the Jordan between Succoth and Zarethan. Solomon made so many of these items they did not weigh the bronze.
the ten movable stands with their ten basins, the big bronze basin called "The Sea" with its twelve bulls underneath, and the pots, shovels, and meat forks. All the items King Solomon assigned Huram Abi to make for the Lord's temple were made from polished bronze. The king had them cast in earthen foundries in the region of the Jordan between Succoth and Zarethan. Solomon made so many of these items they did not weigh the bronze.
The tribe of Naphtali » Remarkable persons of » Hiram
He was the son of a widow from the tribe of Naphtali, and his father was a craftsman in bronze from Tyre. He had the skill and knowledge to make all kinds of works of bronze. He reported to King Solomon and did all the work he was assigned.