Hiram in the Bible
Meaning: exaltation of life; a destroyer
Exact Match
And the days were many, and Judah's wife, the daughter of Shuah, died. And Judah was comforted, and went up to shearers of his sheep, he and his friend Hiram of Adullam, to Timnah.
And Hiram king of Tyre sent messengers to David, and cedar trees, and carpenters, and masons: and they built David an house.
And Hiram king of Tyre sent his servants to Solomon; for he had heard that they had anointed him king in the place of his father; for Hiram always loved David.
And Solomon sent to Hiram, saying,
And it came to pass when Hiram heard the words of Solomon, that he rejoiced greatly, and said, Blessed be Jehovah this day, who has given to David a wise son over this great people.
And Hiram sent to Solomon, saying, I have heard the things which thou sentest to me for: I will do all thy desire concerning timber of cedar, and concerning timber of cypress.
So Hiram gave Solomon cedar-trees and cypress-trees according to all his desire.
And Solomon gave Hiram twenty thousand measures of wheat as food for his household, and twenty measures of beaten oil: thus gave Solomon to Hiram year by year.
And Jehovah gave Solomon wisdom as he promised him. And there was peace between Hiram and Solomon; and they two made a league.
And Solomon's builders and Hiram's builders and the Giblites hewed them, and prepared timber and stones to build the house.
And king Solomon sent and fetched Hiram out of Tyre.
He was a widow’s son from the tribe of Naphtali, and his father was a man of Tyre, a bronze craftsman. Hiram had great skill,
So Hiram made the pillars [in this manner], and two rows around on the one network to cover the capitals which were on the top of the pomegranates; and he did the same for the other capital.
Hiram set up the pillars at the porch of the temple; he set up the right pillar and named it Jachin (may he establish), and he set up the left pillar and named it Boaz (in it is strength).
Hiram also made a sea of cast metal ten cubits from brim to brim, circular in shape and five cubits and 30 cubits in its inner circumference.
Then Hiram made ten bronze stands [for smaller basins]; the length of each stand was four cubits, its width was four cubits and its height was three cubits.
And on the surface of its supports and its borders Hiram engraved cherubim, lions, and palm-shaped decorations, according to the [available] space for each, with borders all around.
Hiram also fashioned ten bronze basins, each holding about 40 baths, each basin measuring four cubits in diameter, with one basin for each stand.
And Hiram made the lavers, and the shovels, and the bowls. So Hiram ended doing all the work that he made for king Solomon for the house of Jehovah:
and the pots, and the shovels, and the bowls. And all these things, which Hiram made king Solomon for the house of Jehovah, were of bright brass.
Hiram king of Tyre having supplied Solomon with timber of cedar, and with timber of fir, and with gold, according to all his desire, that, then, King Solomon gave unto Hiram twenty cities, in the land of Galilee.
And Hiram came out from Tyre to view the cities which, Solomon, had given him, - and they were not pleasing in his eyes.
Hiram asked, "Why did you give me these cities, my friend?" He called that area the region of Cabul, a name which it has retained to this day.
Now Hiram had sent to the king, - a hundred and twenty talents of gold.
And Hiram sent in the fleet his servants, seamen, having knowledge of the sea, - with the servants of Solomon;
Moreover also, the fleet of Hiram, which brought gold from Ophir, brought in, from Ophir sandal-wood in great abundance, and precious stones.
For, a fleet of Tarshish, had the king, at sea, with the fleet of Hiram, - once in three years, came in the fleet of Tarshish, bringing gold and silver, ivory and apes, and peacocks.
And Hiram king of Tyre sent messengers unto David, and timber of cedars, with masons and artificers, to build for him a house.
Then Solomon sent word to
Then Hiram, king of Tyre replied in a letter sent to Solomon: “Because the Lord loves His people, He has made you king over them.”
Hiram said also, “Blessed be the Lord, the God of Israel, who made heaven and earth, who has given King David a wise son, endowed with discretion and understanding, who will build a house for the Lord and a royal palace for himself.
Now I'm sending along Hiram-abi, a skilled craftsman, who is very creative.
Hiram-abi crafted the pots, shovels, and basins, thus completing the work that he did for King Solomon on the Temple of God;
along with its pots, shovels, forks, and all of its other implements that Hiram-abi made from polished bronze for King Solomon and the LORD's Temple.
Solomon had rebuilt the cities Hiram
So Hiram
In addition, Hiram’s servants and Solomon’s servants who brought gold from Ophir
for the king’s ships kept going to Tarshish
Search Results by Versions
Search Results by Book
Thematic Bible
Art » Artisans, skillful » Hiram
He also made two copper crowns. Each one was seven and one half feet tall. They were to be placed on top of the columns. The top of each column was decorated with a design of interwoven chains. They had two rows of copper pomegranates. The crowns on the top of the columns were shaped like lilies, six feet tall, and were placed on a rounded section which was above the chain design. There were two hundred pomegranates in two rows around each crown. Huram placed these two copper columns in front of the entrance of the Temple. The column on the south side was named Jachin and the one on the north was named Boaz. The lily-shaped copper crowns were on top of the columns. The work on the columns was completed. Hiram made a round tank of copper, seven and one half feet deep, fifteen feet in diameter, and forty-five feet in circumference. All around the outer edge of the rim of the tank were two rows of copper gourds. They were all cast in one piece with the rest of the tank. The tank rested on the backs of twelve copper bulls that faced outward. Three faced in each direction. The sides of the tank were three inches thick. Its rim was like the rim of a cup. It curved outward like the petals of a lily. The tank held about ten thousand gallons. Huram also made ten copper carts. Each cart was six feet long, six feet wide, and four and one half feet high. They were made of square panels set in frames. There were figures of lions, bulls, and cherubim on the panels. And there were spiral relief figures on the frames above and underneath the lions and bulls. Each cart had four copper wheels with copper axles. At the four corners were copper supports for a basin. The supports were decorated with spiral relief figures. There was a circular frame on top for the basin. It projected eighteen inches upward from the top of the cart and seven inches down into it. It had carvings around it. The wheels were under the panels. They were twenty-five inches high. The axles were of one piece with the carts. The wheels were like chariot wheels. Their axles, rims, spokes, and hubs were all of copper. There were four supports at the bottom corners of each cart. They were of one piece with the cart. There was a nine-inch band around the top of each cart. Its supports and the panels were of one piece with the cart. The supports and panels were decorated with figures of cherubim, lions, and palm trees, wherever there was space for them, with spiral figures all around. This is how the carts were made. They were all alike, having the same size and shape. Huram made ten basins, one for each cart. Each basin was six feet in diameter and held two hundred gallons. He placed five of the carts on the south side of the Temple. The other five were placed on the north side. The tank was placed at the southeast corner. Huram made the pots and spades and the basins. Huram finished all the work he did for King Solomon in the house of Jehovah. The two pillars and the two cups of the crowns which were on the tops of the two pillars; and the network covering the two cups of the crowns on the tops of the pillars, The four hundred apples for the network, two lines of apples for every network, covering the two cups of the crowns on the pillars; The ten bases, with the ten washing-vessels on them; The great water-vessel (molten sea) (copper sea), with the twelve oxen under it; And the pots and the spades and the basins; all the vessels which Huram made for King Solomon, for the house of Jehovah, were of polished brass. He made them of liquid metal in the lowland district of the Jordan River. This was at the river crossing at Adama, between Succoth and Zarethan. Solomon did not weigh all the utensils because so much copper was used. No one tried to determine how much the copper weighed. Solomon made all the furnishings for Jehovah's Temple: the gold altar, the gold table on which the bread of the presence was placed, lamps stands of pure gold, five on the south side and five on the north in front of the inner room, flowers, lamps, gold tongs, dishes, snuffers, bowls, saucers, incense burners of pure gold, the gold sockets for the doors of the inner room (the Most Holy Place), and the doors of the temple. All the work King Solomon did on Jehovah's Temple was finished. He brought the holy things that belonged to his father David: the silver, gold, and utensils and put them in the storerooms of Jehovah's Temple.
Brass » Hiram
Carving » Hiram
He also made two copper crowns. Each one was seven and one half feet tall. They were to be placed on top of the columns. The top of each column was decorated with a design of interwoven chains. They had two rows of copper pomegranates. The crowns on the top of the columns were shaped like lilies, six feet tall, and were placed on a rounded section which was above the chain design. There were two hundred pomegranates in two rows around each crown. Huram placed these two copper columns in front of the entrance of the Temple. The column on the south side was named Jachin and the one on the north was named Boaz. The lily-shaped copper crowns were on top of the columns. The work on the columns was completed. Hiram made a round tank of copper, seven and one half feet deep, fifteen feet in diameter, and forty-five feet in circumference. All around the outer edge of the rim of the tank were two rows of copper gourds. They were all cast in one piece with the rest of the tank. The tank rested on the backs of twelve copper bulls that faced outward. Three faced in each direction. The sides of the tank were three inches thick. Its rim was like the rim of a cup. It curved outward like the petals of a lily. The tank held about ten thousand gallons. Huram also made ten copper carts. Each cart was six feet long, six feet wide, and four and one half feet high. They were made of square panels set in frames. There were figures of lions, bulls, and cherubim on the panels. And there were spiral relief figures on the frames above and underneath the lions and bulls. Each cart had four copper wheels with copper axles. At the four corners were copper supports for a basin. The supports were decorated with spiral relief figures. There was a circular frame on top for the basin. It projected eighteen inches upward from the top of the cart and seven inches down into it. It had carvings around it. The wheels were under the panels. They were twenty-five inches high. The axles were of one piece with the carts. The wheels were like chariot wheels. Their axles, rims, spokes, and hubs were all of copper. There were four supports at the bottom corners of each cart. They were of one piece with the cart. There was a nine-inch band around the top of each cart. Its supports and the panels were of one piece with the cart. The supports and panels were decorated with figures of cherubim, lions, and palm trees, wherever there was space for them, with spiral figures all around. This is how the carts were made. They were all alike, having the same size and shape. Huram made ten basins, one for each cart. Each basin was six feet in diameter and held two hundred gallons. He placed five of the carts on the south side of the Temple. The other five were placed on the north side. The tank was placed at the southeast corner. Huram made the pots and spades and the basins. Huram finished all the work he did for King Solomon in the house of Jehovah. The two pillars and the two cups of the crowns which were on the tops of the two pillars; and the network covering the two cups of the crowns on the tops of the pillars, The four hundred apples for the network, two lines of apples for every network, covering the two cups of the crowns on the pillars; The ten bases, with the ten washing-vessels on them; The great water-vessel (molten sea) (copper sea), with the twelve oxen under it; And the pots and the spades and the basins; all the vessels which Huram made for King Solomon, for the house of Jehovah, were of polished brass. He made them of liquid metal in the lowland district of the Jordan River. This was at the river crossing at Adama, between Succoth and Zarethan. Solomon did not weigh all the utensils because so much copper was used. No one tried to determine how much the copper weighed. Solomon made all the furnishings for Jehovah's Temple: the gold altar, the gold table on which the bread of the presence was placed, lamps stands of pure gold, five on the south side and five on the north in front of the inner room, flowers, lamps, gold tongs, dishes, snuffers, bowls, saucers, incense burners of pure gold, the gold sockets for the doors of the inner room (the Most Holy Place), and the doors of the temple. All the work King Solomon did on Jehovah's Temple was finished. He brought the holy things that belonged to his father David: the silver, gold, and utensils and put them in the storerooms of Jehovah's Temple.
Hiram » Or huram, king of tyre
Hiram » The artificer
Hiram » Also called huram » An artificer sent by king hiram to execute the artistic work of the interior of the temple
He also made two copper crowns. Each one was seven and one half feet tall. They were to be placed on top of the columns. The top of each column was decorated with a design of interwoven chains. They had two rows of copper pomegranates. The crowns on the top of the columns were shaped like lilies, six feet tall, and were placed on a rounded section which was above the chain design. There were two hundred pomegranates in two rows around each crown. Huram placed these two copper columns in front of the entrance of the Temple. The column on the south side was named Jachin and the one on the north was named Boaz. The lily-shaped copper crowns were on top of the columns. The work on the columns was completed. Hiram made a round tank of copper, seven and one half feet deep, fifteen feet in diameter, and forty-five feet in circumference. All around the outer edge of the rim of the tank were two rows of copper gourds. They were all cast in one piece with the rest of the tank. The tank rested on the backs of twelve copper bulls that faced outward. Three faced in each direction. The sides of the tank were three inches thick. Its rim was like the rim of a cup. It curved outward like the petals of a lily. The tank held about ten thousand gallons. Huram also made ten copper carts. Each cart was six feet long, six feet wide, and four and one half feet high. They were made of square panels set in frames. There were figures of lions, bulls, and cherubim on the panels. And there were spiral relief figures on the frames above and underneath the lions and bulls. Each cart had four copper wheels with copper axles. At the four corners were copper supports for a basin. The supports were decorated with spiral relief figures. There was a circular frame on top for the basin. It projected eighteen inches upward from the top of the cart and seven inches down into it. It had carvings around it. The wheels were under the panels. They were twenty-five inches high. The axles were of one piece with the carts. The wheels were like chariot wheels. Their axles, rims, spokes, and hubs were all of copper. There were four supports at the bottom corners of each cart. They were of one piece with the cart. There was a nine-inch band around the top of each cart. Its supports and the panels were of one piece with the cart. The supports and panels were decorated with figures of cherubim, lions, and palm trees, wherever there was space for them, with spiral figures all around. This is how the carts were made. They were all alike, having the same size and shape. Huram made ten basins, one for each cart. Each basin was six feet in diameter and held two hundred gallons. He placed five of the carts on the south side of the Temple. The other five were placed on the north side. The tank was placed at the southeast corner. Huram made the pots and spades and the basins. Huram finished all the work he did for King Solomon in the house of Jehovah. The two pillars and the two cups of the crowns which were on the tops of the two pillars; and the network covering the two cups of the crowns on the tops of the pillars, The four hundred apples for the network, two lines of apples for every network, covering the two cups of the crowns on the pillars; The ten bases, with the ten washing-vessels on them; The great water-vessel (molten sea) (copper sea), with the twelve oxen under it; And the pots and the spades and the basins; all the vessels which Huram made for King Solomon, for the house of Jehovah, were of polished brass.
ten stands and ten basins on the stands, one pool and the twelve bulls under it, pots, shovels, and three-pronged forks. Huram (Hiram-abiv) made all of them out of polished copper for Jehovah's Temple at King Solomon's request.
Hiram » Called huram, king of tyre » Builds a house for david
Hiram » Called huram, king of tyre » Makes presents of gold and sailors to solomon
Hiram » Called huram, king of tyre » Helps solomon in building the temple
No one can really build a Temple for God. This is because even all the vastness of heaven cannot contain him. How then can I build a Temple that would be anything more than a place to burn incense to God? Send me a man with skill in engraving, in working gold, silver, copper, and iron, and in making blue, purple, and red cloth. He will work with the craftsmen of Judah and Jerusalem whom my father David selected. I know how skillful your lumbermen are, so send me cedar, cypress, and juniper logs from Lebanon. I am ready to send my men to assist yours. Prepare large quantities of timber, because this Temple I intend to build will be large and magnificent. As provisions for your lumbermen, I will send you one hundred thousand bushels of wheat, one hundred thousand bushels of barley, one hundred and ten thousand gallons of wine, and one hundred and ten thousand gallons of olive oil. King Hiram sent Solomon a letter in reply. He wrote: Jehovah made you their king because he loves his people. Praise Jehovah the God of Israel, Creator of heaven and earth! He has given King David a wise son, full of understanding and skill. He now plans to build a Temple for Jehovah and a palace for himself. I am sending you a wise and skillful master metalworker named Huram (Hiram-abi). He was the son of a woman from the tribe of Dan. His father is a native of Tyre. Huram knows how to work with gold, silver, copper, iron, stone, wood, purple, violet, and dark red cloth, and linen. He also knows how to make all kinds of engravings and follow any set of plans that will be given to him. He can work with your skilled workmen and the skilled workmen of His Majesty David, your father. Your Majesty may now send the wheat, barley, olive oil, and wine he promised the workers. We will cut all the trees for lumber you need in Lebanon. Then we will make rafts out of it and send them to you in Joppa by sea. You can take it from there to Jerusalem.
Hiram » Called huram, king of tyre » Dissatisfied with the cities given to him by solomon
Master workman » Instances of » Hiram
He also made two copper crowns. Each one was seven and one half feet tall. They were to be placed on top of the columns. The top of each column was decorated with a design of interwoven chains. They had two rows of copper pomegranates. The crowns on the top of the columns were shaped like lilies, six feet tall, and were placed on a rounded section which was above the chain design. There were two hundred pomegranates in two rows around each crown. Huram placed these two copper columns in front of the entrance of the Temple. The column on the south side was named Jachin and the one on the north was named Boaz. The lily-shaped copper crowns were on top of the columns. The work on the columns was completed. Hiram made a round tank of copper, seven and one half feet deep, fifteen feet in diameter, and forty-five feet in circumference. All around the outer edge of the rim of the tank were two rows of copper gourds. They were all cast in one piece with the rest of the tank. The tank rested on the backs of twelve copper bulls that faced outward. Three faced in each direction. The sides of the tank were three inches thick. Its rim was like the rim of a cup. It curved outward like the petals of a lily. The tank held about ten thousand gallons. Huram also made ten copper carts. Each cart was six feet long, six feet wide, and four and one half feet high. They were made of square panels set in frames. There were figures of lions, bulls, and cherubim on the panels. And there were spiral relief figures on the frames above and underneath the lions and bulls. Each cart had four copper wheels with copper axles. At the four corners were copper supports for a basin. The supports were decorated with spiral relief figures. There was a circular frame on top for the basin. It projected eighteen inches upward from the top of the cart and seven inches down into it. It had carvings around it. The wheels were under the panels. They were twenty-five inches high. The axles were of one piece with the carts. The wheels were like chariot wheels. Their axles, rims, spokes, and hubs were all of copper. There were four supports at the bottom corners of each cart. They were of one piece with the cart. There was a nine-inch band around the top of each cart. Its supports and the panels were of one piece with the cart. The supports and panels were decorated with figures of cherubim, lions, and palm trees, wherever there was space for them, with spiral figures all around. This is how the carts were made. They were all alike, having the same size and shape. Huram made ten basins, one for each cart. Each basin was six feet in diameter and held two hundred gallons. He placed five of the carts on the south side of the Temple. The other five were placed on the north side. The tank was placed at the southeast corner. Huram made the pots and spades and the basins. Huram finished all the work he did for King Solomon in the house of Jehovah. The two pillars and the two cups of the crowns which were on the tops of the two pillars; and the network covering the two cups of the crowns on the tops of the pillars, The four hundred apples for the network, two lines of apples for every network, covering the two cups of the crowns on the pillars; The ten bases, with the ten washing-vessels on them; The great water-vessel (molten sea) (copper sea), with the twelve oxen under it; And the pots and the spades and the basins; all the vessels which Huram made for King Solomon, for the house of Jehovah, were of polished brass. He made them of liquid metal in the lowland district of the Jordan River. This was at the river crossing at Adama, between Succoth and Zarethan. Solomon did not weigh all the utensils because so much copper was used. No one tried to determine how much the copper weighed. Solomon made all the furnishings for Jehovah's Temple: the gold altar, the gold table on which the bread of the presence was placed, lamps stands of pure gold, five on the south side and five on the north in front of the inner room, flowers, lamps, gold tongs, dishes, snuffers, bowls, saucers, incense burners of pure gold, the gold sockets for the doors of the inner room (the Most Holy Place), and the doors of the temple.
ten stands and ten basins on the stands, one pool and the twelve bulls under it, pots, shovels, and three-pronged forks. Huram (Hiram-abiv) made all of them out of polished copper for Jehovah's Temple at King Solomon's request. The king cast them in foundries in the Jordan Valley between Succoth and Zeredah. Solomon made so many of these products that no one tried to determine how much the copper weighed.
Mechanic » Instances of » Hiram
He also made two copper crowns. Each one was seven and one half feet tall. They were to be placed on top of the columns. The top of each column was decorated with a design of interwoven chains. They had two rows of copper pomegranates. The crowns on the top of the columns were shaped like lilies, six feet tall, and were placed on a rounded section which was above the chain design. There were two hundred pomegranates in two rows around each crown. Huram placed these two copper columns in front of the entrance of the Temple. The column on the south side was named Jachin and the one on the north was named Boaz. The lily-shaped copper crowns were on top of the columns. The work on the columns was completed. Hiram made a round tank of copper, seven and one half feet deep, fifteen feet in diameter, and forty-five feet in circumference. All around the outer edge of the rim of the tank were two rows of copper gourds. They were all cast in one piece with the rest of the tank. The tank rested on the backs of twelve copper bulls that faced outward. Three faced in each direction. The sides of the tank were three inches thick. Its rim was like the rim of a cup. It curved outward like the petals of a lily. The tank held about ten thousand gallons. Huram also made ten copper carts. Each cart was six feet long, six feet wide, and four and one half feet high. They were made of square panels set in frames. There were figures of lions, bulls, and cherubim on the panels. And there were spiral relief figures on the frames above and underneath the lions and bulls. Each cart had four copper wheels with copper axles. At the four corners were copper supports for a basin. The supports were decorated with spiral relief figures. There was a circular frame on top for the basin. It projected eighteen inches upward from the top of the cart and seven inches down into it. It had carvings around it. The wheels were under the panels. They were twenty-five inches high. The axles were of one piece with the carts. The wheels were like chariot wheels. Their axles, rims, spokes, and hubs were all of copper. There were four supports at the bottom corners of each cart. They were of one piece with the cart. There was a nine-inch band around the top of each cart. Its supports and the panels were of one piece with the cart. The supports and panels were decorated with figures of cherubim, lions, and palm trees, wherever there was space for them, with spiral figures all around. This is how the carts were made. They were all alike, having the same size and shape. Huram made ten basins, one for each cart. Each basin was six feet in diameter and held two hundred gallons. He placed five of the carts on the south side of the Temple. The other five were placed on the north side. The tank was placed at the southeast corner. Huram made the pots and spades and the basins. Huram finished all the work he did for King Solomon in the house of Jehovah. The two pillars and the two cups of the crowns which were on the tops of the two pillars; and the network covering the two cups of the crowns on the tops of the pillars, The four hundred apples for the network, two lines of apples for every network, covering the two cups of the crowns on the pillars; The ten bases, with the ten washing-vessels on them; The great water-vessel (molten sea) (copper sea), with the twelve oxen under it; And the pots and the spades and the basins; all the vessels which Huram made for King Solomon, for the house of Jehovah, were of polished brass. He made them of liquid metal in the lowland district of the Jordan River. This was at the river crossing at Adama, between Succoth and Zarethan. Solomon did not weigh all the utensils because so much copper was used. No one tried to determine how much the copper weighed. Solomon made all the furnishings for Jehovah's Temple: the gold altar, the gold table on which the bread of the presence was placed, lamps stands of pure gold, five on the south side and five on the north in front of the inner room, flowers, lamps, gold tongs, dishes, snuffers, bowls, saucers, incense burners of pure gold, the gold sockets for the doors of the inner room (the Most Holy Place), and the doors of the temple.
ten stands and ten basins on the stands, one pool and the twelve bulls under it, pots, shovels, and three-pronged forks. Huram (Hiram-abiv) made all of them out of polished copper for Jehovah's Temple at King Solomon's request. The king cast them in foundries in the Jordan Valley between Succoth and Zeredah. Solomon made so many of these products that no one tried to determine how much the copper weighed.